Loading ...
Loading ...
Loading ...
Installation- continued
Electric connection
This oven must be connected to a 220-240V 50Hz power supply. It is earthed via the cord and 10A plug.
Before carrying out the connection to the power supply, the voltage rating of the appliance (stamped on the appliance
identification plate) must be checked for correspondence to the available mains supply voltage, and the mains electric
wiring should be suitable for the oven’s power rating (also indicated on the appliance identification plate);
The switched outlet must be connected to a suitable earth wiring, in conformity to current safety regulations.
This appliance must be plugged into a 10A switched outlet. It should not be located above the appliance and no more
than 1.25m away from it. The power supply cord must not touch against any hot surfaces and must be placed so that its
temperature does not exceed 75C at any point along its length.
After having installed the appliance, the switched outlet must always be in an accessible position. If the electrical supply
(outlet and plug) is restricted, means of all-pole disconnection (circuit breaker) must be accessible and incorporated in the
fixed wiring in accordance with the wiring rules.
NOTE: For connections to the mains power supply, never use adapters, reductions or multiple power points as these may
overheat and catch fire.
The mains terminal block is located on the back of the oven and the terminals are accessible by opening the terminal
block cover. Note: The terminal cover should not be opened when the mains power is still connected to the appliance and
never by an unauthorized person.
The electrical safety of this appliance can only be guaranteed if the oven is correctly and efficiently earthed. The
manufacturer declines all responsibility for damage resulting from an installation which has not been earthed correctly
4
Loading ...
Loading ...
Loading ...