Loading ...
Loading ...
Loading ...
9
How to Dispense Filtered Water
1. Plug into outlet.
NOTE: Ensure Removable Funnel
is installed and Needle Holder is
locked into place.
2. Place a glass on Cup Mat.
3. Press and hold Filtered Water
Button until desired amount
of water has been dispensed.
How to Dispense Flavored Water
1. Plug into outlet.
2. Press Lid Button to open Lid.
NOTE: Funnel and Flavor Capsule Holder
need to be in place before dispensing.
See step 7 in “How to Install and Flush
Water Filter.”
3. Place a flavor capsule into Capsule
Holder. Do not remove foil.
4. Close Lid and snap in place to pierce
flavor capsule.
5. Place a minimum 14-ounce glass on Cup
Mat.
6. Press Flavor + Filtered Button to dispense
12 ounces of flavored water.
NOTE: To stop dispensing, press Flavor +
Filtered Button and press again within
5 minutes to restart.
NOTES:
• Always insert Funnel before Flavor
Capsule Holder.
• Do not lift Lid while water is
dispensing. Lifting Lid causes cycle
to stop. Dispenser will dispense an
additional 12 ounces if restarted.
• Use only cold water in Water
Reservoir. Do not use hot water.
• Do not dispense water without
Removable Needle Holder locked
in place.
w CAUTION
Cut Hazard. Removable needle holder has a sharp needle.
Piercing needle on underside of lid is also sharp. Use caution when handling.
Loading ...
Loading ...
Loading ...