Loading ...
Loading ...
Loading ...
8
How to Install and Flush Water Filter
1. Unplug AquaFusion from outlet.
2. Lift Water Reservoir straight up to
remove.
3. In Water Filter Well, align Water
Filter arrow with arrow outside
Water Filter Well. Turn clockwise
to lock in place.
4. Remove Lid on Water Reservoir.
Add only cold water to MAX
Fill Line. Press Lid onto Water
Reservoir.
5. Holding Water Reservoir with
opening for Water Filter in front,
lower Water Reservoir into place
to secure.
6. Plug into outlet.
7. Insert Funnel into Funnel Holder
Opening, aligning Funnel Tab with
opening cutout. Place Removable
Flavor Capsule Holder in Funnel.
NOTE: Ensure Needle Holder is
locked into place.
8. Place a large container on Cup
Mat. Press and hold Filtered
Water Button for three minutes to
flush new Filter. Water dispensing
will automatically stop after
three minutes. Wait one minute;
then press and hold Filtered
Water Button again to drain
all water from Water Reservoir.
Discard filtered water and repeat
process by filling Water Reservoir
a second time.
NOTES:
• If you start and stop the
draining process, a three-minute
automatic shutoff still occurs.
• Flushing filter is only needed
before Water Filter’s first use.
w CAUTION
Cut Hazard. Removable needle holder has a sharp needle.
Piercing needle on underside of lid is also sharp. Use caution when handling.
Loading ...
Loading ...
Loading ...