Loading ...
Loading ...
3
Technical Specifications
Filter capacity: 100 gallons (378 liters)/up to 5 months
Rated service ow: 0.15 Gal/min (0.57 L/min)
Minimum temperature: 33°F (1°C)
Maximum temperature: 100°F (38°C)
Performance Data Sheet
The replacement filter model number is 87325.
The system conforms to NSF/ANSI 42, 53, and 401 for the specific performance
claims verified and substantiated by test data.
The compounds certified under NSF/ANSI 401 have been deemed as incidental
contaminants/emerging compounds. Incidental contaminants are those
compounds that have been detected in drinking water supplies at trace levels.
While testing was performed under standard laboratory conditions, actual
performance may vary.
While occurring at only trace levels, these compounds can affect the public
acceptance/perception of drinking water quality.
Do not use with water that is microbiologically unsafe or of unknown quality
without adequate disinfection before or after the system.
Systems that are certified for cyst reduction may be used on disinfected water
that may contain filterable cysts.
System and installation shall comply with applicable state and local regulations.
Substance AquaFusion %
Reduction
Influent Concentration (mg/L) % Reduction Requirement / Maximum
Filtered Concentration (mg/L)
NSF Standard 42 – Aesthetic Effects
Chlorine 99% 2.0 mg/L ± 10% ≥ 50%
Particulate Class I particles 0.5 <1 µm 98.6% minimum 10,000 particles/mL ≥ 85%
NSF 53 – Health Effects
Cadmium (pH 6.5) 0.0002 0.03 ± 10% 0.005
Cadmium (pH 8.5) 0.00022 0.03 ± 10% 0.005
Cysts 99.99% > 50,000/L 99.95%
Lead (pH 6.5) 0.00012 0.15 ± 10% 0.010
Lead (pH 8.5) 0.0002 0.15 ± 10% 0.010
Mercury (pH 6.5) 0.0001 0.006 ± 10% 0.002
Mercury (pH 8.5) 0.0001 0.006 ± 10% 0.002
Loading ...
Loading ...
Loading ...