Loading ...
Loading ...
Loading ...
(377,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
driving.
. In some circumstances, the sys-
tem may not be able to correctly
detect the driver state.
NOTE
. The user recognition camera does
not save images, audio, or video.
. The Driver Monitoring System may
not operate correctly when sunlight
is shining into the vehicle in the
following ways.
– Sunlight is shining directly (or
through glass) onto the user
recognition camera.
– There are shadows on the dri-
ver’s face caused by sunlight (or
any light with a strong infrared
component).
– There are large momentary fluc-
tuations in the strength of the
sunlight (or any light with a
strong infrared component) shin-
ing on the face.
. Correct detection may not be possi-
ble when a device that includes an
infrared light source (such as a
commercially available driver mon-
itoring system) is installed in the
vehicle interior.
. The Driver Monitoring System may
not operate correctly at the following
times when the driver is wearing
glasses or sunglasses.
– The sunglasses do not allow the
easy passage of infrared light.
– The surrounding scenery is re-
flected strongly in the lenses of
the glasses or sunglasses.
– The eyes are hidden by the frame
of the glasses and the user
recognition camera cannot de-
tect the eyes.
– The light from an infrared light
source (LED) is reflected in the
lenses of the glasses or sun-
glasses.
– The driver is wearing an eye-
patch.
– The driver is wearing a hat set
deeply over the eyes.
. Depending on the type of mask,
correct detection of inattentive/
drowsy driving may not be possible.
. Correct user recognition is not pos-
sible if the eyes, nose, or mouth is
covered with a mask, muffler, sun-
glasses, or other item.
. The Driver Monitoring System may
not operate correctly when the eye-
brows, eyes, nose, or mouth is
hidden due to item that is between
the face and the system.
. If a thick cover is attached to the
steering wheel, then depending on
the position set for the tilt/telescopic
steering wheel, the cover may block
the system’s view of the face, and
the system and the Driver Monitor-
ing System may not operate cor-
rectly.
. Do not attach any stickers to the
user recognition camera or the infra-
red light source (LED). If the user
recognition camera or infrared light
source (LED) is covered by an
obstruction, it will not be possible
to correctly monitor the driver.
. If an accessory is hung from the
inside mirror, correct detection may
not be possible.
. Do not touch the user recognition
camera or the infrared light source
(LED) directly with your fingers. If
there is dirt or a fingerprint on these
parts, it will not be possible to
correctly monitor the driver. If there
is dirt or a fingerprint on these parts,
either wipe them with a soft dry
cloth, or wipe gently with a damp
cloth after first firmly wringing the
water out.
. If the surface of the user recognition
camera or the infrared light source
(LED) becomes scratched, correct
– CONTINUED –
Driver Monitoring System
375
7
Starting and operating
Loading ...
Loading ...
Loading ...