Loading ...
Loading ...
Loading ...
(231,1)
北米Model "A8330BE-A" EDITED: 2022/ 7/ 26
. The select lever is in a position other
than the “P” position.
“OFF” position (for Canada models):
The headlights are all off *
1
*
2
.
*1: When the light switch is switched to the
“OFF” position while the vehicle is stopped,
the lights turn off. Then the light switch will
automatically return to the “AUTO” position.
*2: The headlights will automatically change to
the AUTO mode when the following condi-
tions are met:
. The engine is running.
. The parking brake is fully released.
. The select lever is in a position other than the
“P” position.
. Auto-on/off wiper-linked headlights
While the light control switch is in the
“AUTO” position, the headlights will auto-
matically turn on when the windshield
wipers operate several times. The head-
lights will automatically turn off when the
wipers stop.
NOTE
The ON/OFF setting of this function can
be changed by a SUBARU dealer.
Consult your SUBARU dealer for de-
tails.
! Welcome lighting function
S03AH0103
The welcome lighting function turns on the
low beam headlight for smooth approach-
ing to or exiting from the vehicle at night or
in a dark place.
The function is activated while all of the
following conditions are met.
. The light control switch is in the “AUTO”
position.
. It is dark enough to turn on the auto on/
off headlights.
NOTE
If the engine is turned off after turning
off the light switch, the welcome light-
ing function may not operate (Canada
models).
When approaching:
While the welcome lighting function is
activated, the low beam headlights, instru-
ment panel illumination, parking lights,
front side marker lights, rear side marker
lights, tail lights and license plate lights will
automatically illuminate when unlocking
the doors and the rear gate by using the
remote keyless entry system.
The lights will remain illuminated for 30
seconds
*1
and then turn off. However, if
any of the following operations is done, the
lights will turn off.
. The doors are locked.
. The light control switch is turned to a
position other than “AUTO”.
. The ignition switch is turned to the “ON”
position.
When exiting:
While the welcome lighting function is
activated, the low beam headlights, instru-
ment panel illumination, parking lights,
front side marker lights, rear side marker
lights, tail lights and license plate lights will
remain illuminated even when either of the
following operation is done.
. The push-button ignition switch is
turned to the “OFF” status (models with
“keyless access with push-button start
system”).
. The key is pulled out from the ignition
switch (models without “keyless access
with push-button start system”).
The lights will turn off under any of the
following conditions.
. 3 minutes have passed since the lights
were illuminated by the welcome light-
ing function.
. 30 seconds have passed since the door
is opened and closed.*
1
. The light control switch is turned to a
position other than “AUTO”.
– CONTINUED –
Light control switch
229
3
Instruments and controls
Loading ...
Loading ...
Loading ...