Loading ...
Loading ...
Loading ...
sharkclean.com
BASE SETUP
The Self-Empty Base charges your robot and holds dirt and debris from up to 30 days of cleaning.
• Select a permanent location for the base.
• Choose a level surface in a central area. Remove protective film from base.
• Place the base with its back against the wall, in an area with a good Wi-Fi signal.
• Set up the base on bare floor.
• Remove any objects closer than 3 feet from the sides of the base, or closer than 5 feet from the from the front.
• Plug in the Charging Cord, and turn on the Power Switch on the back of the base. When the base is plugged
in and the power switch is turned on, the GREEN Power Indicator Light
on the base will illuminate.
INSTALLING THE SIDE BRUSH
Snap the 1 included Side Brush located in the red
packaging, onto the square peg on the bottom of
the robot.
NOTE: Do not place base against heating elements or baseboards, or in direct sunlight.
NOTE: The robot will make a loud noise when it empties its debris into the base. This is normal and not a cause for concern.
5 ft.
3 ft.
3 ft.
Loading ...
Loading ...
Loading ...