Loading ...
Loading ...
Loading ...
TOOLS REQUIRED FOR ASSEMBLY
(2) 7/16" Wrenches
(2) 1/2" Wrench
(1) Pliers
(1) Hammer
STEP 1: (SEE FIGURE 1)
• install a 5/16-18 x 2-3/4" hex bolt (17) and a 5/16"
jam nut (25) in each bag arm channel.
STEP 3: (SEE FIGURE 3)
Secure each bag arm channel to the side of the
sweeper housing with a plastic wing nut (31) installed
onto the bolt assembled in step 1.
insert a pivot rod retainer (30) down into the end of
each bag arm channel.
install a compression spring (32) into the bottom of
each of the pivot rod retainers to secure them to the
bag arm channels.
4
17
FIGURE 1
STEP 2: (SEE FIGURE 2)
Slide the bag arm channels (4) into the sweeper
housing as shown in figure 2. Secure them to the
sweeper housing with a 5/16-18 x 2-1/2" hex bolt (15)
and 5/16" nylock nut (21). Tighten bolt until snug. Do
not overtighten.
FIGURE 3
STEP 4: (SEE FIGURE 4)
Attach the drawbar (14) to the sweeper by fastening
a drawbar bracket (8) above and below the drawbar
using three 5/16" x 2-1/2" hex bolts (15) and 5/16"
nylock nuts (21).
_-15 4
\ \
\
21
14\
FIGURE 2
FIGURE 4
Call 1-866-576-8388 for missing parts or assembly help 5
DO NOT RETURN TO STORE
Loading ...
Loading ...
Loading ...