Loading ...
Loading ...
10
The appliance operates at the maximum power for rapid
heating of the room.
- To turn o the appliance press button ON/STAND-BY
(A). The display could show the count down for about
6 seconds. To completely turn o the appliance, remove
the plug from the socket.
Please note: The display can show the temperature in
both °C and °F. To change the temperature scale, press and
hold the + key for few seconds, then release.
ECO PLUS function
In this operating mode the appliance will automatically set
the power level to guarantee the best comfort reducing the
energy consumption.
The maximum temperature setting is 26 °C. To activate this
function, press the ECO PLUS button (D).
Oscillation button
If you want the appliance to distribute the airow over a
larger area, press the oscillation button (C) . The appliance
will then oscillate right and left. To stop the oscillation in the
desired position, just press oscillation button (C) again.
24HOUR DIGITAL TIMER
This function can be activated from any operating mode.
Delayed switch-on: with the appliance in the STAND-BY
position, press the timer button (E) .
The display shows the symbol and the time remaining
before switch-on. To set the timer, use the + and - adjustment
buttons (B), then wait a few seconds for the programming to
be set. The display returns to show for stand-by and the
symbol to indicate you have set the timer.
When the programmed time has been reached, the appliance
turns on with the same settings it had during the previous
operation.
Delayed shut-o: With the appliance on, press the timer
button (E) .
The display shows the symbol and the time remaining
before shut-o. To set the timer, use the + and – adjustment
buttons (B), then wait a few seconds for the programming to
be set. The display returns to show the current settings and
the symbol to indicate you have set the timer.
When the programmed time as been reached the appliance
shuts o automatically. If you want to go back to operation
without the timer, press the timer button (E) twice.
The timer symbol disappears from the display.
Using the remote control (certain models only)
The remote control functions correspond to those on the
control panel. See the section “Operation and Use" on the
previous page for a description of the functions.
Inserting or replacing the batteries
- The remote control is
provided with a lithium
battery CR2032. To let
the appliance function,
remove the battery
cover strip, by pulling it.
- To replace the batteries,
remove the battery
cover by rotating it.
Replace the battery
paying attention to respect the right polarity as shown
in gure 1.
- Replace the cover rotating it towards the position .
- Old batteries must be removed and disposed o in
accordance with current legislation as they are harmful
to the environment.
Extra Europe market only:
Important!
- WARNING - KEEP BATTERIES OUT OF REACH OF CHIL-
DREN.
- Swallowing may lead to serious injury in as little as 2
hours or death, due to chemical burns and potential
perforation of the oesophagus.
- Examine devices and make sure the battery compart-
ment is correctly secured. Do not use if compartment is
not secure.
- Dispose of used button batteries immediately and safe-
ly. Flat batteries can still be dangerous.
MAINTENANCE
- Before carrying out any maintenance, always unplug
from the mains socket.
- During the season when the appliance is in use, clean
the air intake and outlet grilles regularly using a vacuum
cleaner.
- Never use abrasive powders or solvents to clean the
appliance.
- The dust lter which retains impurities in the air, It is
integrated in the removable back cover. To clean the
lter, remove the grille by pulling outward. Blow it
lightly, then replace it into the appliance.
Fig. 1
Loading ...