Loading ...
Loading ...
Loading ...
NOTE: If the engine attemptsto start
before the 5th pull,go to the next
step immediately.
• Move choke lever (_ to Half Choke.
• Pullthe starter handle sharply until
the engine runs,but no morethan 5
pulls(below3Q°F, tOpulfs).
• After a 5 second warm-up, move the
choke lever (_ tothe Run position.
• Allow the unitto runfor 30 more se-
condsat Run before moving the
throttlelever (_ to the -_ position.
Ifthe engine has not started after5
pulls (at Half Choke), repeat the Start-
ing a Cold En_ne Procedure. If the en-
ginestilldoes not start, proceed to
Startinga Flooded Engine.
• Tostop the engine, press and hold
the stop (_) switchuntilengine stops.
FOR A WARM ENGINE
• Move the throttle lever (_) to the fast
position.
CUSTOMER RESPONSIBILITIES
• Pullthe starter handle sharplyuntil
the engine starts, but no morethen 5
pulls. ,
NOTE: If the engine has notstarted,
pullstarter handlesharplyfor 5 more
pulls.If enginestill does not run, it is
probablyflooded. Proceed to Starting
a Flooded Engine.
• Tostop the engine, press and hold
the stop O switch untilenginestops.
DIFFICULT STARTING OR STARTING
A FLOODED ENGINE
Rood anguscanbestm'edbyp c-
in9the chokeleverin1heOil Choke
position.Move throttlelevertofast _ ;
then, pullropeuntilenginestarts.After
enginestsds,rnovethe throttla leverto
.A. toallowenginetoldla.
Starlingcouldrequirepullingthe starter
ropemeny lfmesdependingon how
badlythe unitisflooded,it the unitstill
doesn'tstart,refertothe Troubleshooting
•Chartor cell 1-800-235-5878.
CARE & MAINTENANCE TASK
Check for Loosefasteners and parts
Check for damaged or worn parts ,
Clean unitand labels
Clean air filter
R.eplace spark plug
Replace fuel filter
GENERALRECOMMENDATIONS
The warranty onthis unitdoes notcov-
eritems that have been subjectedto
operatorabuse or negligence. To re-
ceivefullvalue fromthe warranty,the
operatormustmaintain unitas instruct-
ed in this manual. Variousadjustments
willneed to be made-periodicallyto
properlymaintain your unit.
CHECK FOR LOOSE
FASTENERS AND PARTS
• Spark Plug Boot
• Air Filter
• Housing Screws
CHECK FOR DAMAGED OR
WORN PARTS
Refer replacement ofdamaged/worn
parts to your Sears Sennce Center.
_On/Stop Switch- EnsureOn/stop
switchfunclkx_ properly.Tostop en-
gine,pushand holdswitchb the STOP
WHEN TO PERFORM
Before each use
Beforeeach use
After each use
Every 5 hoursof opemdon
Yearly
Yearly
_sitionuntilenginecemss toa com-
pletestop.Make sureenginestops;
thenrestartangine and continue.
• FuelTank- Do notuse unitiffuettank
• OptionalVacuum Bag Do notuse
vacuum bag if it istom or damaged.
CLEAN UNIT & LABELS
• Clean the unitusinga damp cloth
with a milddetergent.
• Wipe off unitwith a clean dry cloth.
CLEAN AIR FILTER
Do notclean filteringasoline or other
flammable solvent.Doingso can
create a fire hazard or produceharmful
evaporative emissions.
Cleaning the air filter: ,
A dirtyair filterdecreases engine psr-
formanse and increases fuel consump-
tionand harmfulemissions.Always
clean after every 5 hoursof operation.
-8-
Loading ...
Loading ...
Loading ...