Loading ...
NOTE:
1. Do not pinch the power supply cord or the flexible gas conduit between the range and the wall.
2. Do not seal the range to the side cabinets.
3.24" (61 cm) minimum clearance between the cooktop and the bottom of the cabinet when the
bottom of wood or metal cabinet is
protected by not less than 1/4" (0.64 cm)
flame retardant millboard covered with
not less than No. 28 MSG sheet metal,
0.01 5"(0.4 ram) stainless steel,
0.024"(0.6 mm) aluminum, or 0.020"
(0.5 mm) copper. Door Open A
30" (76.2 cm) minimum clearance when (see note 5)
the cabinet is unprotected.
4. For cutouts below 22 7/8"(58.1 cm),
appliance will slightly show out of the
cabinet.
5. Allow at least 19 1/4" (48.9 cm) clearance
for door depth when it is open.
Side panel
Figure 1
*IMPORTANT: To avoid cooktop breakage for cutout width (E dimension) of more
than 30_/_6'' (76.4 cm), make sure the appliance is centered in the counter opening
while pushing into it. Raise leveling legs at maximum position, insert the appliance
in the counter and then level. Make sure the unit is supported by the leveling
legs not by the cooktop itself.
IMPORTANT: Cabinet and countertop
width should match the cutout width.
E
22 7/8" (58.1 cm) min.
23 1/4" (59.05 cm) max.
(see Note 4)
r
i
11/8"
_ (2.86 cm)
FRONT
OF _ F -_
CABINET Ref.
A. HEIGHT B. WIDTH C, COOKTOP DIDEPTHTOFRON- E. CUTOUTWlDTH***. F, CUTOUT GIHEIGHT
J J WIDTH OF RANGE (Countertop and DEPTH I OF COUNTERTOP
.... Cabinet) "
35 5/8" (90.5 cm) - 30" (76,2 cm) 31Y2" (80 cm) 28 5/16" (71,9 cm) 30+_I/16" 21 3/4" (55,2 cm) Min. 36 5/8" (93 cm) Max.
22 I/8" (56,2 cm) Max
36 5/8" (93cm) (76,2_+0,I 5 cm) 24" (61 cm) Min. with 35 5/8" (90.5 cm) Min.
backguard
Loading ...
Loading ...
Loading ...