Loading ...
Loading ...
Loading ...
KEEP WARM
NOTE: The 'Keep Warm' Function only operates for temperatures 70°, 80°, 90° and
95°, and does not operate with 100°C to prevent the kettle from boiling dry.
• Press the Keep Warm button after selecting the desired temperature, or during the
heating cycle.
• The Keep Warm function will illuminate and maintain the water at the selected
temperature for up to 2 hours.
• During this time the kettle may cycle on and off to maintain the temperature at the desired
setting.
• To deactivate the Keep Warm function, press the Keep Warm button. The function will be
deactivated and button illumination will extinguish.
SLEEP MODE
If the kettle is inactive, and you don’t touch the controls for 1 minute, the lights will go out to
save power. To wake the kettle, press any of the controls, or lift off and replace the kettle from
the power base, all temperature buttons will illuminate with a solid light.
GENERAL
• Remove the kettle from the power base before pouring.
• To avoid the risk of splashing, pour slowly and do not over-tilt the kettle.
USING WITH INSUFFICIENT WATER
• Using the kettle with insufcient water will shorten the life of the element.
• If the kettle is accidently switched on when it does not contain sufcient water, a boil-dry
cut-out will switch the kettle off.
• If the boil dry cutout has activated, the kettle will not function until it has cooled.
• Sit the kettle on a stable heat resistant surface until it has fully cooled down.
• Do not ll the kettle with water until it is cold, or it may eject hot water.
CARE AND MAINTENANCE
• Remove the plug from the wall power outlet.
• Allow the kettle to cool down fully.
• Wipe over the outside of the kettle and power base with a damp cloth. A mild dishwashing
detergent may be used if required.
• Keep all connectors and sockets dry.
• Do not immerse the kettle or power base in liquid.
• Do not use alkaline cleaning agents or harsh abrasives when cleaning this appliance.
• Clean the inside of the kettle using the instructions in the “DE-SCALE REGULARLY”
section.
DE-SCALE REGULARLY – EVEN IN SOFT WATER AREAS
Water contains minerals that will form deposits on the inside of your kettle, commonly referred
to as scaling. Scaling discolours the internal surfaces and can affect the performance.
To maintain the performance of your kettle, it should be de-scaled every three months or so.
De-scale more frequently if you live in a hard water area.
• Add 2 to 3 teaspoons of citric acid or a commercial de-scaler to the empty kettle.
• Fill the kettle with fresh cold water to the MAX level mark on the water gauge.
• Select the 100°C button and allow the kettle to boil.
• Once the water has boiled, allow the kettle to cool and then discard the water into the sink.
Loading ...
Loading ...
Loading ...