Loading ...
Loading ...
Loading ...
Basic operation en
33
Notes
¡ The programme settings are not
saved permanently for the pro-
gramme.
¡ The setting is saved if you activate
or deactivate the intelligent dosing
system.
Adjusting additional programme
settings
1. Press Options to call up additional
programme settings.
2. Select the programme settings.
3. Press Options to call up the main
menu.
13.4 Saving the programme
settings
1. Set the Memory programme.
2. Press to call up the sub-menu.
3. Select a programme.
4. Press Main menu to call up the
main menu.
5. Adjust the programme settings if
required.
a The programme is saved.
13.5 Loading laundry
Note:To prevent creasing, take note
of the maximum load for the
→"Programmes", Page26.
Requirement:The laundry is pre-
pared.
→"Laundry", Page31
1. Open the door.
Make sure that the drum is empty.
2. Place the laundry in the drum.
3. Close the door.
Ensure that there is no laundry
trapped in the door.
13.6 Adding detergent and
care product
For programmes in which intelligent
dosing is not possible or desirable,
you can add detergent manually.
Note:The dosing recommendation is
aimed at the maximum load for the
programme.
Tip:In addition to intelligent dosing,
you can also add additional care
product for laundry, e.g. stain re-
mover, starch or bleach, to the
manual dosing compartment. Do not
add any additional detergent to the
manual dosing compartment to avoid
overdosage and/or foaming.
Note:Observe the information about
detergents and care products
→Page32.
1. Pull out the detergent drawer.
2. Pour in detergent.
→"Detergent drawer", Page18
3. If required, add the care product.
4. Push in the detergent drawer.
13.7 Starting the programme
Note:If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press Start/Reload .
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
13.8 Adding laundry
1. Press Start/Reload .
The appliance pauses.
2. Open the appliance door.
3. Add or remove laundry.
Loading ...
Loading ...
Loading ...