Loading ...
Loading ...
Loading ...
17REVERSING DOOR16 REVERSING DOOR
7. Replace the lower hinge part to the right side and
fixing it which the special flange self-tapping screws.
Replace the adjustable bottom feet part to another
side and fixing it.
8. Transfer the door to the properly position, adjust the
lower hinge part, make the hinge axis into the lower
hole of the door.
9. Transfer the upper hinge part and make the upper
hinge axis into the upper hole of the door, and adjust
the position of the door(please support the door
with your hand when doing it), fixing the upper hinge
part with the special flange self-tapping screws.
10. Install the screw hole on the top left corner of the
refrigerator. Install the upper hinge (which is in the
plastic bag) on the right corner. Put the other upper
hinge cover into the plastic bag.
WARNING
WARNING
When changing the side at which the door opens, the
appliance must not be connected to the mains. Remove
plug from the mains beforehand.
REVERSING THE DOOR OPENING DIRECTION
(WRM2400)
In these examples the operation is changed from right
side hinging to left side hinging.
Precautions
• Turn off the appliance.
• Unplug the power cable.
• Remove all food from the appliance.
• Remove shelves and baskets.
• Do not lay the appliance down flat on its back as this
will impair its operation.
• When tilting the appliance to access the underside,
support it so that it will not fall to the floor.
Note: All parts removed must be retained to reinstall
door.
REVERSING THE DOOR OPENING DIRECTION
(WIM1000)
• Support the door from below and remove the two
screws (1) that secure the hinge (2) to the bottom
right side of the appliance. Stand the door to one
side carefully.
• Unscrew the left front leg (3) and transfer it to the
right side.
• Remove the metal hinging pin (6) and the spring (5)
beneath it from the hole in the top right hand corner
of the door.
• Insert the spring (5) first and then the pin (6) –
previously removed from the right hand side – into
the top left hole.
• Position the door on the cabinet with the pin (6)
protruding from the top left corner entering the
corresponding hole (arrowed in left hinging assembly
illustration) under the top frame of the cabinet.
• While holding the door in the closed position, secure
the hinge (2) – previously removed from the other
side – onto the bottom left corner, tightening the 2
screws (1) firmly.
Right sided hinging assembly
1
2
7
6
5
3
Left sided hinging assembly
1
3
5
6 7
2
Loading ...
Loading ...
Loading ...