WIM1000WD User Manual

Loading ...

CHANGING OVER THE ICE BOX DOOR

15REVERSING DOOR14

1. Keep the freezer compartment door closed.

Using a screwdriver, remove the mount screw for

the installation button, and take the installation

button down.

2. Open the freezer compartment door a little way.

Pull down the freezer compartment door and the

cap which covering on the up door bearing

3. Using a screwdriver, take down the installation

buckle, and then fix it in the opposite side.

4. Turn the freezer compartment door through 180°,

cover the cap on the up door bearing, then fit the

door into the up door axle hole.

5. Keep the freezer compartment door closed. Fix the

installation button to the lower door bearing, Press

the installation button to make it have no gap with

the cavity, then fix the screw.

WARNING

1. When changing the side at which the door opens,

the appliance must not be connected to the mains.

Remove plug from the mains beforehand.

2. Please use the screw hole covers to decorate the

screw holes in the original installation position. The

screw hole covers can be find in the plastic packet.

REVERSING THE DOOR OPENING DIRECTION

(WRM2400 & WFM1700)

4. Remove the door from the lower hinge. NOTE: When

removing the door, watch for washer(S) between the

lower hinge and the bottom of the lower door that may

stick to the door. Do not lose.

5. Place it on a smooth surface with its panel upwards.

Loose screw

and pard

, then install them to the left

side and tighten securely.

6. Lay the refrigerator on soft foam packaging or similar

material. Remove both adjustable bottom feet parts, and

the lower hinge part by unscrewing the special flange

selftapping screws.

The side at which the door opens can be changed, from the right

side (as supplied) to the left side, if the installation site requires.

WARNING

When reversing the door, the appliance must not be

connected to the mains. Ensure that the plug is removed from

the mains socket.

Tools you will need

Note: If required you may lay the refrigerator on its back

in order to gain access to the base, you should rest it on

soft foam packaging or similar material to avoid damaging

the backboard of the refrigerator. To reverse the door, the

following steps are generally recommended.

1. Use a putty knife or thin-blade screwdriver to prize

the screw cover which is at the top left corner of the

refrigerator, and the upper hinge cover which cover cover

which is at the top left of corner of the refrigerator.

2. Unscrew the special flange self tapping screws which are

used for fixing the left upper hinge part by a 8mm socket

driver or a spanner (please support the upper door with

your hand whe doing it).

3. Remove the upper hinge axis, transfer it to reversed side

and tighten securely, then put it in a safe place.