Loading ...
Loading ...
Loading ...
The side in which the door opens can be changed
from the right side (as supplied) to the left side, if the
installation site allows for it. Tools you will need:
1. 8mm socket driver
.
①
②
2. Phillips head screwdriver
.
①
②
3. Thin-blade screwdriver
.
①
②
Before you begin, place the fridge on it’s back in order to
gain access to the base, you should rest it on soft foam
packaging or similar material to avoid damaging the
cooling pipes at the rear of the fridge.
Reverse the door
1. Stand the fridge, remove the two screws on the back
of the top cover, then lift the top cover and place it
on a padded surface to prevent scratching.
.
①
②
2. Remove the four screws as shown in the diagram.
Remove the top hinge and keep for reassembly.
.
①
②
REVERSING THE DOOR OPENING DIRECTION
(WFM0900, WIM1200 & WRM1400)
3. Lift the door and place it on a padded surface to
prevent scratching. Remove both adjustable feet and
remove the bottom hinge bracket by unscrewing the
bolts. Then transfer them to the other side.
Note: 1. You need to move the hinge pin from hole
1
to
2
before transfer. 2. You need to install the foot
on the side which does not have a hinge.
.
①
②
4. Set the door into its new place making sure the
pin enters the bushing at the lower frame section.
Replace the lid by fitting the upper hinge into the
upper door's hole, securing it with the two screws.
Replace another two screws to another side.
.
①
②
5. Replace the top cover. Tighten the two screws on
the back of top cover.
.
①
②
hinge pin
foot
1
2
replace note copy to read: "Note: 1. You
need to move the hinge pin from hole 1
to 2 before transfer. 2. You need to install
the foot on the side which does not have
a hinge."
18 REVERSING DOOR
Loading ...
Loading ...
Loading ...