Loading ...
Loading ...
Loading ...
15REVERSING DOOR
REVERSING THE DOOR OPENING DIRECTION
(WRM2400 & WFM1700)
4. Remove the door from the lower hinge. NOTE: When
removing the door, watch for washer(S) between the
lower hinge and the bottom of the lower door that may
stick to the door. Do not lose.
5. Place it on a smooth surface with its panel upwards.
Loose screw
1
and pard
2
, then install them to the left
side and tighten securely.
6. Lay the refrigerator on soft foam packaging or similar
material. Remove both adjustable bottom feet parts, and
the lower hinge part by unscrewing the special flange
selftapping screws.
The side at which the door opens can be changed, from the right
side (as supplied) to the left side, if the installation site requires.
WARNING
WARNING
When reversing the door, the appliance must not be
connected to the mains. Ensure that the plug is removed from
the mains socket.
Tools you will need
Note: If required you may lay the refrigerator on its back
in order to gain access to the base, you should rest it on
soft foam packaging or similar material to avoid damaging
the backboard of the refrigerator. To reverse the door, the
following steps are generally recommended.
1. Use a putty knife or thin-blade screwdriver to prize
the screw cover which is at the top left corner of the
refrigerator, and the upper hinge cover which cover cover
which is at the top left of corner of the refrigerator.
2. Unscrew the special flange self tapping screws which are
used for fixing the left upper hinge part by a 8mm socket
driver or a spanner (please support the upper door with
your hand whe doing it).
3. Remove the upper hinge axis, transfer it to reversed side
and tighten securely, then put it in a safe place.
Loading ...
Loading ...
Loading ...