Loading ...
Loading ...
Loading ...
4 Installation & Operation Manual Copyright © Puretec Pty Ltd 2018
Installation Guide
Servicing
Should it be necessary to have your mixer serviced while under warranty, please carry out the
following procedure:
1. Firstly call the plumber, preferably the one that has installed it, (most problems are
caused by the supply lines not being cleaned out properly, prior to connecting the
mixers).
2. Make sure that the plumber has installed your mixer according to the User Guide.
plumbing supply store or your local Puretec stockist.
Important: We do not recommend the dismantling of any internal part of the mixer as
this will breach your warranty.
Technical Information
Puretec mixers can be used in conjunction with:
• Pressure storage hot water system.
• Any mains water pressure not exceeding 500 kPa.
• Maximum hot water temperature of 60°C.
• Instantaneous hot water system.
Recommended Working Pressures
• Minimum working pressure 50 kPa (7.5 psi).
• Maximum working pressure 500 kPa (72.5 psi).
night, sometimes doubling or trebling normal daytime pressures.
Note: Not suitable for unequal pressure. On high pressure areas where the pressure exceeds
the recommended working pressure as indicated above pressure limiting valves must be
installed or warranty is voided.
Loading ...
Loading ...
Loading ...