Loading ...
Loading ...
Loading ...
installation 9
Lift the door while adjusting the washer. To
raise the door, rotate washer clockwise (when
viewed from the bottom). To lower door, rotate
washer counter-clockwise (when viewed from the
bottom).
Raising/Lowering Door
To adjust the flipper mullion:
1 Loosen the set screw located on the flipper
mullion hinge.
SeE
8crew
Adjusting Flipper Mullion Screw
Re-tighten the set screw, ensuring it is between
the spokes of the set washer. Set screw will not
be tight, just insert until it is flush with the hinge.
2
Adjust flipper mullion height. For proper
connection with the flipper mullion guide, there
should be a separation about the thickness of a
coin (0.060 inches, or 1.5 mm) between the guide
and flipper mullion.
Set Screw
NOTE
If after adjusting doors higher the door makes a
popping/clicking sound, remove set screw and
replace with a longer one.
Adjusting Flipper Mullion Height
3 Re-tighten set screw.
Loading ...
Loading ...
Loading ...