Loading ...
Loading ...
Loading ...
8
|
ENGLISH
Assembling Your
Heavy Duty Steam Cleaner
STEAM CLEANING ACCESSORIES
WARNING: Do not connect accessories while unit is emitting steam.
JET NOZZLE / SCRAPER / TRIANGLE BRUSH
1. Select Jet Nozzle and push onto the Steam Nozzle (A).
2. Rotate accessory until the yellow lock/release button snaps into the accessory hole (B).
NOTE: The Jet Nozzle can be connected to the end of an Extension Wand for reaching
high or difcult spots. Connect the Extension Wand (or Wands) as outlined on Page 8,
then connect your Jet Nozzle to the Wand in the same way as you would normally con-
nect to the Steam Nozzle.
UTILITY BRUSHES / ANGLED NOZZLE
NOTE: Accessories connect to the Jet Nozzle, not the Main Nozzle.
1. Firmly press accessories onto tip of Jet Nozzle. Press it on as far as possible to prevent
steam leakage.
2. To remove accessories, simply grip it rmly and pull it off Jet Nozzle.
Steam Nozzle
B
A
Loading ...
Loading ...
Loading ...