Loading ...
Loading ...
Loading ...
7
COUNTERTOP OVERHANG
The control panel is designed to sit fl ush against the enclosure front wall. If the non-combustible enclosure countertop
extends beyond the front wall, creating a countertop overhang, it must be cut fl ush with the front wall for the width of
the control panel or a gap will be created exposing the forward portions of the left and right side grill fi re walls. See
illustrations above.
Important: FOR YOUR SAFETY, you must provide openings in the island enclosure for drainage, replacement
air, and cross-ventilation of any storage area exposed to possible leakage from gas connections, the
unit, or propane bottles. See the ENCLOSURE REQUIREMENTS section for details.
TOP VIEW
Countertop
Lower support
Countertop
overhang
Control panel
NON-COMBUSTIBLE
ENCLOSURE CUT-OUT
DIMENSIONS
Fig. 7-1
FRONT VIEW
B
C
D
See next page
for substrate
considerations
Countertop
overhang
X
TOP VIEW
SIDE VIEW
Countertop
overhang
(Control
panel)
(Countertop)
Y
1
/
4
"
Clearance
(Overhang)
X=
1
/
2
"
Y= Total
Countertop
Overhang
A
Control
panel
Check clearance for
control panel removal
REV 0 - 1412011330
L-C2-437
MODEL SPECIFICATIONS TABLE
Table 1 24" 30" 36"
Main burner Quantity
N/P orifi ce drill size
2
1.82mm / 1.16mm
3
#50 / 1.16mm
3
#49 / #56
Backburner
▲
N/P orifi ce drill size
#53 / #64 #53 / #64 #52 / #62
Infrared searing burner
▲
N/P orifi ce drill size 1.82mm / 1.16mm #50 / 1.16mm #49 / #56
Insulating liner model # (not included)* 24-IL-B 30-IL-B 36-IL-B
Power supply rating
120VAC / 0.3A / 60 Hz
Oven lights rating 12V / 10 watt halogen bulb
A Countertop to unit bottom cut-out*8
1
/
2
"8
1
/
2
"8
1
/
2
"
B Side to side non-combustible cut-out* 24
1
/
2
" 30
5
/
8
" 36
7
/
8
"
C Front to back non-combustible cut-out*† 19
1
/
2
" 19
1
/
2
" 19
1
/
2
"
D Control panel width non-combustible cut-out‡ 25
1
/
2
" 31
5
/
8
" 37
7
/
8
"
▲
If equipped
* Note: If installing this grill in a combustible enclosure, the correct AOG insulating liner must be used. Consult liner instructions for
counter cut-out dimensions and installation.
†
Includes any substrate at front wall of enclosure (in the area the rear of the control panel is to sit fl ush against). See SUBSTRATE
section on next page.
‡
Only applicable for non-combustible enclosures that have countertops with an overhang (see illustration and section below).
MODEL SPECIFICATIONS (Cont.)
Loading ...
Loading ...
Loading ...