Loading ...
Loading ...
Loading ...
29
1. Switch off the appliance and disconnect it
from the mains.
2. Unscrew and wash the lamp cover and wipe it
dry.
3. Remove the illuminant and replace it by a new
one of the same kind and power:
➢ Heat-proof illuminant for ovens (300
0
C), 200-
240V/25W/G9 thread /50 Hz.
4. Do not use any other type of bulb
5. Screw the bulb in, making sure it is properly
inserted into the ceramic socket.
6. Screw in the lamp cover.
4.2 Removing of the guides
1. Unscrew the screws of the guides.
2. Rotate the guide vertically to make it leave the side panel.
3. Take the guide out of the side panel hole, using an approx. 45
0
angle between the
guide and side panel.
4.3 Removing of the oven door
1. Fully open the door.
2. Fold up the right and left side of locking rod (Picture A).
3. Close the door until reach to stop step, hold on both left and right sides of the
door, then reclose the door, upward and downward and pull out the door.
Loading ...
Loading ...
Loading ...