Loading ...
Loading ...
Loading ...
MAINTENANCE SCHEDULE L_"/"._/_._. _"_..._ J,_ p'
RE O RSERV,OE f F Z/ / / y y TsEnv,oE o rEs
Chec,ora.o.,--Check "13rePressure
Check Operator Presence and
T Intedock Systems If
R Check for Loose Fasteners tf V's Ik_
Sharpen/Replace Mower Blades _1_
T Lubrication Chart If
0 Check Battery Level 1_4
R C_een Battery and Terminals If V /
Check Transaxle Cooling v"
Check V-Belts If
Check Engine Oil Level I_ I_
Change Engine Oil (with oil filter) I1111r= ll_
E Change Engine Oil (without Oilfilter) _hl_1,2 _i_
N CalanAIr FiRer _I_':
G Clean Air Screen
NI Inspect Muffler/Spark
Arrestsr
l/
E Replace Oil Filter (If equipped) I_1.=
Clean Engine Cooling Fine 1_2
Replace Spark Plug _#z If
Replace/,Jr Filter Paper Cartridge
Replace Fuel Fitter
1 - Change more often when opetattng under a heavy load ot
in high ambient temperatures,
2 - Sen/ice m_ro often when oporettng in _rty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter, and
check blades and belts for wear. A new
spark plug and clean air filter assure
proper air-fuel mixture and help your
engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
3 - Rep4ace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance*lree battery.
5 - Tighten front axle pivot bolt to 35 flabs, maximum.
Do no_ overtlght on.
LUBRICATION CHART
® Tie Rod Ball Joints
Spindle
Zerk Zerk
(_Front Wheel
Bearing Bearing Zerk
Zerk
_)Steedn
Sector
Gear
Teeth
(_Check/ @Engine
Add
Transaxle
Fluid
_) SAE 30 or 10w30 motor oil
(_ General Purpose Grease
@ Refer to Maintenance "ENGINE" Section
(_ Spray silicone lubriant(Move Bootsto
Lubricate)
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant
16sparingly.
Loading ...
Loading ...
Loading ...