Loading ...
Loading ...
Loading ...
9
NT510 Multi-system Scanner Manual_English_V1.00
I USB Port - provides a USB power connection between the Scan Tool and PC or laptop.
K TF Card Port - holds the TF memory card for data backup and software update.
IMPORTANT
Do not use solvents such as alcohol to clean keypad or display. Use a mild nonabrasive
detergent and a soft cotton cloth.
2.2 Accessory Descriptions
This section lists the accessories that go with the scanner. If you find any of the following items
missing from your package, contact your local dealer for assistance.
1 User’s Guide - provides operation instructions for the usage of the scanner.
2 USB Cable - provides connection between the scanner and a computer to check data.
3 TF Memory Card - contains the scanner’s operating software and applications.
IMPORTANT
Do not remove the memory card unless performing updates to the card.
4 Memory Card Reader- connects the TF card to computer to update software and print test
results.
5 Nylon Carry Pouch - stores the scanner and its accessories.
2.3 Technical Specifications
Display: Backlit, 240*320 TFT color display
Working Temperature: 0 to 60 (32 to 140)
Storage Temperature: -20 to 70 (-4 to 158)
Power Supply: 8-18V vehicle power and 3.3V USB power
Dimensions (L*W*H): 200*100*38mm
Weight: 0.6 Kg
3 Getting Started
This section describes how to provide power to the scanner, provides brief introductions of
applications loaded on the scanner and display screen layout and illustrates how to input text
and numbers with the scan tool.
3.1 Providing Power to Scanner
Before using the scanner, make sure to provide power to the scanner.
The unit operates on any of the following sources:
● 12-volt vehicle power
● USB connection to personal computer.
3.1.1 Connecting to Vehicle Power
The scanner normally powers on whenever it is connected to the data link connector (DLC).
To connect to vehicle power:
1. Locate the data link connector (DLC). The DLC is generally located under the dash on the
driver side of the vehicle.
2. Attached the Diagnostic cable to the scanner and tighten the captive screws to ensure good
connection.
3. Connect a correct adapter to the data cable according to the vehicle being serviced and plug it
into the vehicle DLC.
4. Switch the ignition key to the ON position.
5. The scanner automatically boots up.
Loading ...
Loading ...
Loading ...