Loading ...
Loading ...
Loading ...
10
NT510 Multi-system Scanner Manual_English_V1.00
IMPORTANT
Never try to provide power for the scan tool from USB connection when the scan tool is
communicating with a vehicle.
3.1.2 Connecting to Personal Computer with USB Cable
The scan tool also receives power through the USB port when it is connected to a PC for
updating software and transferring saved files.
To connect to PC:
1. Insert the small end of the USB cable to the USB port at the right side of the scanner and the
large end to a computer.
2. Press the power switch of the scan tool to power it on.
3.2 Application Overview
When the scan tool boots up, the Home screen opens. This screen shows all applications loaded
on the unit. The available vehicle applications may vary depending on software configuration.
Take a GM customized scanner for example, following applications are preloaded into the
scanner:
● OBDII/EOBD - leads to OBDII screens for all 9 generic OBD system tests.
● GM - leads to screens for diagnostic trouble code information, live datastream, ECU
information, active test, special functions, oil service and EPB maintenance applications on
vehicles sold worldwide.
● Setup - leads to screens for adjusting default settings to meet your own preference and view
information about the scanner.
● Playback - leads to screens for access to saved data files.
Figure 3-1 Sample Home Screen
3.3 Input Dialog Box
This section illustrates how to use the scan tool to input letters and numbers, such as VIN
number, channel number, test values and DTC number. Typically, you may be required to input
letters or numbers when you are doing any of the following operations.
● VIN entry
● input channel number
● set adaptation value
● enter block number
● enter login code
● key matching
● look up DTCs
Loading ...
Loading ...
Loading ...