Loading ...
Loading ...
Loading ...
32
NT510 Multi-system Scanner Manual_English_V1.00
command is activated, the tool allows to "flash" the electric parking brake unit with the saved
clutch data.
" Perform control function and reset function on Opel EPB vehicles - allows to
apply/release park brake cable service, provide park brake cable service replacement
procedures and calibrate the parking brake systems after brake service.
" Sensor calibration on Honda EPB vehicles - allows to program the current output value of
each sensor into the electric parking brake unit.
" Provides parking brake unjam procedure and perform longitudinal accelerometer
calibration on Land Rover EPB vehicles - allows to drive the electronic park brake so it is
unjamed in the releasing direction and then drive it into mounting position or the latching
position; also allows to perform longitudinal accelerometer calibration.
! EPB systems must be deactivated before carrying out any maintenance/service work on the
brakes such as changing of pads, discs and calipers.
" Use proper tools to avoid the risk of body injuries of mechanics and technicians and damage
to the brake system.
" Make sure the vehicle is properly blocked after deactivation of the systems.
6.3 Tire Pressure Monitoring System (TPMS) Programming
TPMS Service menu allows you to check the tire sensor IDs from the vehicle ECU and to
perform TPMS programming and reset after tires and/or TPM sensors are replaced and/or tires
are rotated.
6.4 ABS/Airbag Services
ABS/Airbag Services menu let you use the scanner temporarily to activate or control anti-lock
brake systems and air bags or components.
Typical test options include:
" ABS Manual Control Tests–allows to manually control the actuators in order to test ABS
motors, solenoids, solenoid enable relays, EMBs, and more.
" ABS Motor Test–allows to manually control the ABS pump motor.
" ABS Version Test–displays the name of the brake system and the ABS controller version
number, software ID, and sequence value.
" Actuator Tests–allows to manually control the actuators in order to test AYC valves, inlet
valves, outlet valves, pump motors, and TRACS valves.
" Auto-bleed Test, Automated Bleed, or Service Bleed - removes air from the internal brake
fluid chambers after servicing the brakes.
6.5 Steering Angle Sensor (SAS) Calibration
SAS Calibration menu let you perform calibration of the Steering Angle Sensor, which
permanently stores the current steering wheel position as straight-ahead in the sensor EEPROM.
On successful calibration of the sensor, its fault memory is automatically cleared.
6.6 Diesel Particulate Filter (DPF) Regeneration
DPF Regeneration menu let you perform the DPF cleaning to clear the blockage through
continuous burning of the particulates captured in the DPF filter. When a DPF regeneration cycle
is completed, the DPF light automatically goes off.
Loading ...
Loading ...
Loading ...