Loading ...
Loading ...
Loading ...
Food Mixer
STM 3620WH
EN
EN-11
2020
04/2020
7. After you have finished using the appliance, set the speed control knob A0 to position 0 (stand-by
mode) and disconnect the power cord from the power socket.
8. Disassemble the food mixer according to the instructions included in chapter Assembling and
disassembling the appliance. Use a soft plastic spatula to remove mixes from the mixing bowl A4
and the attachment.
9. Clean out the food mixer after each use according to the instructions in chapter Cleaning and
maintenance
QUICK GUIDE TO MIXING
Attachment type Ingredients Amount Processing time Selecting a speed
Whisk A2
Egg whites max. 8 pcs 4 minutes Level 6
Whisk A2
Cream 500 ml 4–5 minutes Level 6
Whisk A2
Mayonnaise 3 egg yolks 1 minute Level 2–4
Beater A3
Cake dough approx. 800 g 6 minutes Level 2–6
Kneading hook A1
Bread dough max. 600 g of flour 4 minutes Level 2
Note:
The above processing times are only a reference. To prevent ingredients from splattering out of
the bowl, select an initial speed level of 1 or 2. Later set a higher speed based on requirements.
CLEANING AND MAINTENANCE
• Before cleaning the food mixer, always turn it off by setting the speed control knob A0 to position
0 and disconnect it from the power socket.
• It is necessary to thoroughly clean the attachment after every use in hot water and neutral kitchen
detergent. Then rinse it under clean running water and thoroughly wipe dry with a fine wiping
cloth.
Note:
The attachments are intended for short term contact with food (including beverages), i.e. max.
4 hours.
• Wash the stainless steel mixing bowl A4 using hot water and neutral kitchen detergent. Then rinse
it under clean running water and wipe dry with a fine wiping cloth.
Tip:
If you whisked egg whites, first rinse the whisk A2 and the mixing bowl A4 under cold water.
If you were to use hot water, the egg white remains would harden and their removal would be
more difficult.
• To clean the base unit A5 and the arm A8, use a cloth dipped in a weak detergent solution. Then
wipe everything dry.
• Never submerge the appliance or its power cord in water or any other liquids. For cleaning do not
use thinners or solvents, or cleaning agents causing abrasion. Otherwise the surface treatment of
the appliance could be damaged.
Loading ...
Loading ...
Loading ...