Loading ...
Loading ...
Loading ...
ChangingtheDeckBelt& PT0 Belt
WARNING: Be sure to shut the engine off,
remove ignition key, disconnect the spark
plug wire(s) and ground against the engine to
prevent unintended starting before removing
the belt(s).
Lower the deck by moving the deck liftlever into the
bottom notch on the right fender.
Remove the belt guards by removing the self-
tapping screws that fasten them to the deck.
Grasp the rearmost portion of the PTO idler bracket
and pivot it toward the discharge chute to relieve
tension on the PTO belt.
Remove the PTO belt from around the engine
pulley (or electric PTO clutch) and from around the
PTO idler pulley(s).
Grasp the deck idler pulley and pivot it toward the
left to relieve tension on the deck belt.
Remove the deck belt from around all pulleys,
including the deck idler pulley.
Route the new belts (deck belt first) as shown in
Figure 17 and Figure 18.
Remount the belt guards removed earlier.
A
All belts on your tractor are subject to wear and should
be replaced if any signs of wear are present.
IMPORTANT:The V-belts found on your tractor are
specially designed to engage and disengage safely, A
substitute (non-OEM) V-belt can be dangerous by not
disengaging completely. For a proper working machine,
use factory approved belts.
To change or replace the deck belt and PTO belt on
our tractor, proceed as follows:
Engine Pulley
(or Electric PTO Clutch)
Left Hand Pulley
PTO Idler Bracket
42-inchDecks
)
Deck Belt (Bottom)
• PTO Belt (Top)
Right Hand Pulley
(beneath belt guard)
Deck Idler Pulley
Center Pulley
NOTE: Lefthand belt cover notshown for clarity.
Self-Tapping Screws
Electric PTO Clutch
Deck idler Pulley
Figure 17
PTO Idler Bracket
(mounted on tractor)
46-inchDecks
w/Electric PT0
Deck Belt (Bottom)
• PTO Belt (Top)*
Right Hand
Double Pulley
guard)
Left Hand
Double Pulley
NOTE: Left hand belt cover not shown for clarity.
Center Pulley
\
Self-TappingScrews
Figure 18
21
'Refer to the
diagram on page
42 for manual
PTO belt routing.
Loading ...
Loading ...
Loading ...