Loading ...
Loading ...
Loading ...
SANTOS: User and maintenance manual
98155 EN 4.3- 05 2018 10/ 22 www.santos.fr
Grinding adjustment:
CARE: Changing the grinding setting will always require resetting the
timers. See the information chart in the next section:
Note: Never operate the machine with the two grindstones in contact. Letting the
grindstones come into contact may result in the grindings jamming in the grinder unit and
premature wear of the grindstones.
The machine is set in the factory for the "0" marker on the nut (5) graduated plate to
correspond to the finest grinding without the grindstones touching (fig. C).
On delivery, the machine is set to an espresso-type grinding with the adjusting nut (5)
approximately on the marker (15)
1. Hold the adjustment nut (5) with one hand and press the indexing pointer (7)
with the other
2. Tighten the adjustment nut by turning in a clockwise direction (right-handed
thread) by one or two notches for finer grinding.
3. Loosen the adjustment nut by turning in an anti-clockwise direction (right-
handed thread) by one or two notches for coarser grinding.
4. Release the indexing pointer (7) to lock the nut in position.
5. Draw off a few measures of coffee to check the grinding adjustment.
The machine can provide very fine grinding. However, depending on the type of coffee
used, be careful not to bring the grindstones into contact as this would cause the output to
drop considerably and alter the coffee aroma.
!
Loading ...
Loading ...
Loading ...