Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/90462472-ms5202/bg5.png)
DIGITAL + ANALOGUE HIGH VOLTAGE INSULATION TESTER
OPERATOR’S MANUAL
SAFETY INFORMATION
1.1.1 When using the meter, the user must observe all normal safety rules concerning:
• Protection against the dangers of electrical current
• Protection of the meter against misuse
1.1.2 When the meter is delivered, check that it has not been damaged in transit.
1.1.3 When poor condition under harsh preservation or shipping conditions caused, inspect and confirm
this meter without delay.
1.1.4 test line or test clips must be in good condition. Before using verify that the insulation on test line or
test clips is not damaged and/or the leads wire is not exposed.
1.1.5 Full compliance with safety standards can be guaranteed only if used with test line or test clips
supplied. If necessary, they must be replaced with the same model or same electric ratings.
1.1.6 This meter must only be used by a competent trained person and in strict accordance with the
operator’s manual.
1.2 DURING USE
1.2.1 Before use, ensuring that there is no any components damaged by high voltage in the measured
circuit.
- 2 -
Loading ...
Loading ...
Loading ...