Loading ...
Loading ...
Loading ...
11
Installation - Ductless (Recirculating) version
Attention!
If it is intended to use the hood in the recirculating
version do not remove any duct knockouts and order
the necessaruy charcoal filter from your supplier.
Remove the grease filters.
Remove the 2 lateral supports and the posteior one.
Rotate blower unscrewing the two fixing screws.
Reinstall the posterior support.
Use the diagram or the hood as a template and mark
the locations on the cabinet for electrical
wiring and keyhole screw slots.
Installation to wall
• Use the diagram or the hood as a template
and mark the locations on the wall for electrical wiring
and keyhole screw slots.
For recessed bottom cabinet only
If the cabinets have front, side or back trim, make 2
wood shims the width of the trim and attach them to
the cabinet bottom recess on both sides.
Cut holes at marked locations for duct and electrical
wiring. For the vertical duct, cut out 3/4” extra toward
the front of the cabinet so you can move the duct
freely when installing the hood.
It may also ease installation by cutting the hole 10 1/2”
instead of 10”.
Loading ...
Loading ...
Loading ...