Loading ...
Loading ...
Loading ...
Oven Cleaning
FEATURE OVERVIEW
Delayed Self-Clean Cycle (Cont'd.)
INSTRUCTIONS
Stopping or Interrupting a Self-Cleaning cycle:
If itbecomes necessary to stop or interrupt a Self-Cleaning cycle
due to excessive smoke or fire in the oven:
PRESS DISPLAY
1. Press @. @
2. Once the oven has cooled down for approximately 1HOUR and
the "DOOR LOCKED" icon is no longer displayed, the oven
door can then be opened (Fig. A). Fig.A
NOTE: If your clock is set for normal 12 hour display mode the Delayed Self-Clean cycle can never be set to start
more than 12 hours in advance. To set for Delayed Self-Clean 12-24 hours in advance see page 15 for instructions to set
the control for the 24 hour time of day display mode.
Adjusting Oven Temperature
FEATURE OVERVIEW
The temperature in the oven has been pre-set at the factory. When first using the oven, be
sure to follow recipe times and temperatures. If you think the oven is too hot or too cool, the
temperature in the oven can be adjusted. Before adjusting, test a recipe by using a
temperature setting that is higher or lower than the recommended temperature. The baking
results should help you to decide how much of an adjustment is needed.
PRESS
QQ
®
Note: The oven
temperature adjustments
made with this feature wilt
not change the Self-Clean
cycle temperature.
DISPLAYINSTRUCTIONS
To adjust the oven temperature higher:
1. Press _ for 6 seconds (Fig. 1).
2. To increase the temperature use the number pads to enter the
desired change. (Example 30°F) (_ (_ (Fig. 2). The
temperature may be increased as much as 35°F (17°C).
3. Press _) to accept the temperature change and the display
will return to the time of day (Fig. 3). Press i@) to reject the
change if necessary.
To adjust the oven temperature lower:
1. Press _ for 6 seconds (Fig. 4).
2. To decrease the temperature use the number pads to enter the
desired change. (Example-30°F) O (_ and then
press (_) (Fig. 5). The temperature may be decreased as
much as 35°F (17°C).
3. Press (_ to accept the temperature change and the display
will return to the time of day (Fig. 6). Press i@) to reject the
change if necessary.
3O
®
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Figure 5
Figure 6
Loading ...
Loading ...
Loading ...