Loading ...
Loading ...
Loading ...
6
Getting to Know Your Stir Stick Popcorn Maker
Product may vary slightly from illustration
Figure 1
Butter melting tray
Lid Handles
Clear Popcorn Maker Lid
Base Handles
Popcorn Maker Base
ON/OFF Button
Polarized Plug
(not shown)
Lid cap
Do not overll the machine with popcorn.
Power rating 800W, Voltage : AC 120V/60Hz
Before Using for the First Time
DO NOT USE if the unit is cracked or broken.
“ON/OFF” switch must always be “OFF” ( O ) when the heating plate is removed.
1. Carefully unpack the Stir Stick Popcorn Maker and remove all packaging materials.
2. Wash lid cap and clear Stir Stick Popcorn Maker lid in warm, soapy water; rinse anddrythoroughly.
3. Place the base on a clean, at, heat-resistant working surface.
CAUTION: During popping, the base gets hot. Make sure the surface is able to withstand heat or use a
trivet to protect the working surface.
4. Clean the rod with a slightly soapy sponge or cloth. Wipe with a clean, damp cloth anddrythoroughly.
5. Clean the base’s non-stick popping plate with a soapy sponge or cloth. Wipe with a clean, damp cloth and
dry thoroughly.
6. The Stir Stick Popcorn Maker is now ready for use.
NOTE: When your popcorn maker is heated for the rst time, it may emit slight smoke orodor. This is
normal and should disappear after 1 or 2 uses. This does not affect the safety oftheappliance. However,
if it emits smoke or odor, it may affect the avor of the rst batch ofpopcorn, and it is recommended that
these be discarded.
Loading ...
Loading ...
Loading ...