Viking VDSC530T 30"W. Sealed Burner Dual Fuel Electronic Control Range

Use & Car e Manual - Page 59

For VDSC530T.

PDF File Manual, 64 pages, Read Online | Download pdf file

VDSC530T photo
Loading ...
Loading ...
Loading ...
58
59
Product Care
Product Care
If Self-Clean is selected:
Note: A fan noise will be heard during the self-clean cycle and will
continue to run for the 3-1/2 hour duration of the self-clean cycle.
1. The control initiates the door lock. During this period, the display
shows “LOCKING”.
2. Once the door is locked, the control displays SELF CLEAN and the
time remaining on the display.
3. The control continues in SELF CLEAN mode for the required
SELF CLEAN duration.
4. Once the SELF CLEAN cycle is complete, the control displays
”COOLDOWN”. The door remains locked.
5. When 500ºF is reached, the control unlocks the door and
“COOLDOWN” is no longer displayed.
Self-Clean Cycle
CAUTION
WARNING
BURN OR ELECTRICAL SHOCK HAZARD
Make sure all controls are ”OFF” and oven is COOL before cleaning.
Failure to do so can result in burns or electrical shock.
DO NOT touch the exterior portions of the oven after self-cleaning
cycle has begun, since some parts become extremely hot to the touch!
During the first few times the self-cleaning feature is used, there may
be some odor and smoking from the curing of the binder in the high-
density insulation used in the oven. When the insulation is thoroughly
cured, this odor will disappear. During subsequent self-cleaning
cycles, you may sense an odor characteristic of high temperatures.
Keep the kitchen well-vented during the self-cleaning cycle.
Replacing Oven Lights
WARNING
DO NOT touch bulb with bare hands. Clean off any signs of oil from
the bulb and handle with a soft cloth.
1. Unsnap glass light cover
using a screwdriver in the
access groove.
2. Firmly grasp light bulb and
pull out.
3. Replace with halogen bulb
using volt and wattage
requirements listed on glass
cover.
4. Replace the light cover by
snapping glass cover onto
metal box.
5. Reconnect power at the main
fuse or circuit breaker.
access
groove
light
bulb
glass light
cover
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect the electric power at the main fuse or circuit
breaker before replacing bulb.
Loading ...
Loading ...
Loading ...