Loading ...
Loading ...
Loading ...
35
Operation
Features
Your garage door opener is equipped with features to provide you with greater control over your garage door operation.
ALERT2CLOSE
The Alert2Close feature provides a visual and an audible alert that an unattended door is closing.
TIMER-TO-CLOSE (TTC)*
The TTC feature automatically closes the door after a specified time period that can be adjusted using a TTC enabled control panel
(Models 881LMW or 880LMW). Prior to and during the door closing the garage door opener lights will flash and the garage door
opener will beep.
MYQ
myQ® allows you to control your garage door opener from your mobile device from anywhere. myQ® technology uses a 900 Mhz signal
to provide two way communication between the garage door opener and myQ® enabled accessories.
The garage door opener has an internal gateway that allows the garage door opener to communicate directly with a home Wi-Fi®
network and access your myQ® account.
THE PROTECTOR SYSTEM
®
(SAFETY REVERSING SENSORS)
When properly connected and aligned, the safety reversing sensors will detect an obstruction in the path of the infrared beam. If an
obstruction breaks the infrared beam while the door is closing, the door will stop and reverse to full open position. If the door is fully
open, and the safety reversing sensors are not installed, or are misaligned, the door will not close from a remote control. However, you
can close the door if you hold the button on the control panel or keyless entry until the door is fully closed. The safety reversing
sensors do not affect the opening cycle. For more information see page 24.
LIGHTS
The garage door opener Integrated LED lights will turn on when the opener is initially plugged in; power is restored after interruption,
or when the garage door opener is activated. The lights will turn off automatically after 4-1/2 minutes.
USING YOUR GARAGE DOOR OPENER
When the door is closed and the garage door opener is activated the door will open. If the door makes contact with an obstruction
while opening, the door will stop, opener beeps and lights flash 5 times. When the door is in any position other than closed and the
garage door opener is activated, the door will close. If the garage door makes contact with an obstruction while closing, the door will
reverse, opener beeps and lights flash 5 times. However, you can close the door if you hold the button on the control panel or keyless
entry until the door is fully closed.
The safety reversing sensors do not affect the opening cycle. The safety reversing sensor must be connected and aligned correctly
before the garage door opener will move in the down direction.
BATTERY BACKUP*
The battery backup system allows access in and out of your garage, even when the power is out. When the garage door opener is
operating on battery power, the garage door opener will run slower, the light will not function, the Battery Status LED will glow solid
orange, and a beep will sound approximately every 2 seconds.
CAMERA*
Live steam what is happening in your garage with your garage door opener’s built-in camera. Just connect your opener to Wi-Fi and
set up an account with the myQ
®
App. For more information, see page 37.
AUTOMATIC GARAGE DOOR LOCK*
Garage door opener models featuring the Security Shield are compatible with the LiftMaster Automatic Garage Door Lock (Model
841LM).
*If applicable.
Loading ...
Loading ...
Loading ...