Loading ...
Loading ...
Loading ...
CARE AND MAINTENANCE
TROUBLESHOOTING
1) The light does not come on at all:
2) Fuse blows or circuit trips when light is turned on.
a) Make sure the wall switch and circuit breaker are on.
b) Make sure the wiring is correct.
a) Check for crossed wires, ensure wiring is correct.
If unable to fix any of the above issues, please consult a certified electrician.
• To clean, turn off and wipe with a damp, non-abrasive cloth.
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-645-3184,
Monday - , 7:00 a.m. -4:00 p.m., CST .Friday
4
ASSEMBLY INSTRUCTIONS
STEP 6:
a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage.
Your installation is completed now. Restore electricity. Retain this sheet for future reference.
STEP 6
Note: We recommend 2 people for this step.
a. Thread the beaded end of Center Stem (A) into
the Coupling on the underside of the Socket
Cluster. Hand tighten until snug.
b. Pass the Shade (D) over the end of the Center
Stem (A). Secure by threading the Finial (B) onto
the Center Stem (A). Hand tighten until snug.
c. One person hold the Shade (D), another person
attach the Loop on one end of the Side Chain (E)
to the Hook on the side of the Fixture Canopy of
Socket Assembly (C). Attach the Loop on the
other end of the Side Chain (E) to the Hook inside
of the Shade (D).
Coupling
A
D
B
E
C
STEP 5:
a. Re-attach the ceiling canopy of the socket
assembly (C) to the crossbar assembly (AA).
b. Secure with the previously removed mounting
balls.
Mounting
Screw
Mounting Ball
Ceiling Canopy