Loading ...
Loading ...
Loading ...
USING THE LIQUID FABRIC
SOFTENER DISPENSER
After loading the washer, measure and
add the recommended amount of fabric
softener into the dispenser. Follow
manufacturer's directions.
NOTE: Pouring too much fabric softener
into the dispenser will cause the fabric
softener to dispense instantly into the
load due to siphoning action. This instant
"dump" could damage fabrics and will
make it appear that your dispenser is
not working correctly.
• Add warm water to fill the dispenser
until it reaches the bottom of the
opening of the funnel-shaped portion
of the dispenser.
• Fabric softener is dispensed into the first
deep rinse water automatically.
NOTE: Fabric softeners are not com-
patible with detergents. This dispenser
should never be used in the PREWASH
Cycle since it would dispense fabric
softener into a wash load that has not
been rinsed. Undiluted fabric softener
spilled on fabric may result in spots that
look like oil stains.
If you ever use your dispenser this way
by mistake, rewash the load with extra
detergent to remove these deposits.
To Remove the Fabric Softener
Dispenser for Cleaning:
STEP 1. Pull up on the Fabric Softener
Dispenser to remove the dispenser from
the agitator.
STEP 2. Grasp both ends of the dis-
penser. Pull to separate.
=)
STEP 3. Remove internal holding cup.
STEP 4. Rinse all three parts with
warm water.
STEP 5. Place the holding cup in the top
outer portion of the dispenser. ....
STEP 6. Snap the bottom and the top of
the Fabric Softener Dispenser together.
STEP 7. Replace the dispenser on the
agitator; press firmly to snap into place.
31
Loading ...
Loading ...
Loading ...