Loading ...
Loading ...
Loading ...
SETTING YOUR CYCLE
SELECTOR (TIMER) CONTROL
Use this control to choose the
agitation time and to start the washer.
• For heavy soil and sturdy fabrics,
use the full time.
• For light soil and delicate fabrics,
use less time.
PERMANENT PRESS II
_li'teili,t_i#_il "I,q IIq [[4
The PERMANENT PRESS II Cycle
includes a load cooling process
that reduces wrinkling compared
to other cycles.
You can select up to 10 minutes of
wash time.
NOTE: When the timer reaches PAUSE,
the washer will drain and pause for no
more than two minutes while some of the
wash water is drained and replaced with
rinse water.
ULTRA CLEAN
Use this cycle for most loads to get
between 6 and 16 minutes of wash
time.
PREWASH
Use this cycle to get up to 4 minutes
of agitation to help remove heavy soils
and stains that need pretreatment.
PREWASH Cycle should be followed
by an ULTRA CLEAN or PERMANENT
PRESS II Cycle with additional
detergent added.
SOAK
SOAK Cycle features 4 minutes of
agitation followed by an unlimited soak
time to help remove heavy soils and
stains that need pretreatment. You will
need to reset the washer to a SPIN
setting to remove water. SOAK Cycle
should be followed by an ULTRA CLEAN,
PERMANENT PRESS II, or PREWASH
Cycle with additional detergent.
NOTE: We do not recommend hot water
for soaking. It may set some stains.
SHOR_ 6 _'_2_ RINSE
26
Loading ...
Loading ...
Loading ...