Loading ...
Loading ...
Loading ...
9 IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
4
IMPORTANT SAFET Y I NS T RUCT I ONSRE AD AND SAVE THESE INSTRUCTIONS
INSTALLER: Save these instructions for the local
electrical inspector’s use. Please leave these instructions
with this unit for the owner. Show the owner the location
of the circuit breaker or fuse. Mark it for easy reference.
OWNER: Please retain these instructions for future
reference.
WARNING
If the information in this manual is not followed exactly,
fire or shock may result causing property damage or
personal injury.
WARNING
WARNING
Turn off power circuit at service panel and lock out panel
before wiring this appliance. Requirement: 120 VAC, 60
Hz 15 A. Allow the appliance to cool after the power has
been turned off before servicing the appliance.
WARNING
AUTOMATICALLY OPERATED DEVICE
To reduce the risk of injury disconnect from power
supply before servicing.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE THE FOLLOWING:
▯ Use this unit only in the manner intended by the
manufacturer. If you have questions, contact the
manufacturer.
▯ Before servicing or cleaning unit, switch power off at
service panel and lock the service disconnecting
means to prevent power from being switched on
accidentally.
When the service disconnecting means cannot be
locked, securely fasten a prominent warning device,
such as a tag, to the service panel.
WARNING
Do not repair, replace or remove any part of the
appliance unless specifically recommended in the
manuals. Improper installation, service or maintenance
can cause injury or property damage. Refer to this
manual for guidance. All other servicing should be done
by an authorized service provider.
WARNING
ELECTRICAL SHOCK HAZARD
GROUNDING INSTRUCTIONS
WARNING
Improper grounding can result in a risk of electric shock.
This appliance must be grounded. Grounding reduces
the risk of electric shock by providing a safe pathway for
electric current in the event of a short circuit.
Be sure your appliance is properly installed and
grounded by a qualified technician. Installation, electrical
connections and grounding must comply with all
applicable codes.
If required by the National Electrical Code (or Canadian
Electrical Code), this appliance must be installed on a
separate branch circuit.
WARNING
WARNING: To reduce the risk of fire or electric shock, do
not use this fan with any solid-state speed control device.
If the information in this manual is not
followed exactly, fire or shock may result
causing property damage, personal injury or
death.
- DO NOT store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
- WHAT TO DO IF YOU SMELL GAS
DO NOT try to light any appliance.
DO NOT touch any electrical switch.
DO NOT use any phone in your building.
Immediately call your gas supplier from a neighbor’s
phone. Follow the gas supplier’s instructions.
If you cannot reach your gas supplier, call the fire
department.
- Installation and service must be performed by an
authorized service provider, service agency or the gas
supplier.
DO NOT remove connections.
DO NOT use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Loading ...
Loading ...
Loading ...