Loading ...
Loading ...
Loading ...
INSTALLING YOUR WASHER
_ Before STEP 5 is complete, do not plug the power cord into a wall socket.
CAUTION
Z_ Packaging materials can be dangerous to children; keep all packaging material (plastic bags,
WAR,_,Gpolystyrene, etc.) well out of the reach of children.
Installation flow chart
Selecting a _ Removing theshipping Connectingthe water
location bolts (*Drumonly) and the drain
T
Please
check again
before
steps.
[
Yes
Adjusting the _ Poweringyour washing
levelling feet machine
Does
Yourwasher
haveexcessvibration
ornoise?
Running a Calibration mode Finish the
(Referto the following
No description) installation
STEP 1
Selecting a location
Before install the make the location:you
washer, sure
Has a hard, level surface without carpeting or flooring that may obstruct ventilation Is
away from direct sunlight
Has adequate ventilation
Is not exposed to freezing temperatures (temperatures are never below 32 °F or 0 °C)
Is away from heat sources such as oil or gas
Has enough space so that the washer doesn't stand on its power cord
STEP 2
Removing the shipping bolts
Before installing the washing machine, you must remove all
shipping bolts from the back of the unit.
1. Hold the shipping bolt with your hand and pull it through
the wide section of the hole. Repeat for each shipping bolt.
2. Fill the holes with the supplied bolt hole covers.
3. Store the shipping bolts in a safe location where they can
be easily retrieved in the event that you have to move the
washing machine in the future.
20 Hnstalling your washer
Loading ...
Loading ...
Loading ...