Loading ...
Loading ...
Window Mounting
Remove Chassis
1. To slide chassis from cabinet, hold cabinet
with left hand, while pulling on strap provided
at the front of the unit.
2. Do not remove formed foam at the front of
the unit.
Assemble Window
Filler Panels
1. Place cabinet on floor, a bench, or a table.
2. Slide "I" section of window filler panel into
side retainer on the side of the cabinet (see
Figures 3-4). Do both sides.
STRAP NOTE: Do not use strap for lifting unit. It
is for sliding chassis WITHIN cabinet only (to aid
in cleaning, maintenance, etc.). Be CAREFUL of
sharp edges on coil fins.
Install Top Angle
and Side Retainers
1. Attach foam gasket to _lbp Rail and Side
Retainers as shown in FIG. 1.
2. Install Top Rail Support Brace, and Side
Retainers to cabinet as shown using screws
and (4) speed nuts to secure
3. Insert top and bottom legs of window filler
panel frame into the channel of the Top Rail
and Bottom Rail. Repeat on other side.
(continued)
3
Loading ...
Loading ...
Loading ...