Loading ...
4. CHECK FOR ANYTHING THAT COULD
BLOCK AIRFLOW - check area outside
of window for things such as shrubs,
trees, or awnings. Inside, be sure
furniture, drapes, or blinds will not
stop proper airflow.
5. Check the available electrical service -
power supply must be the same as that
shown on the unit serial nameplate. (See
Owner's Guide for serial plate location.)
Power cord is 48" long. Be sure you have an
outlet near. It is best to not use extension
cords!
All models have a 3-prong service plug to
provide proper service and safe positive
grounding. Do not change plug in any way.
Do not use an adapter plug. If your present
wall outlet does not match your plug, call a
qualified electrician to make the needed
change.
Avoid fire hazard or
electric shock. Do not use an extension
cord or an adapter plug. Do not remove
any prong from the power cord.
Grouding type
wall receptacle
under
6. Carefully unpack air conditioner - remove
all packing material. Protect floor or carpet
from damage.Two people should be used to
move and install unit.
Tools Required
t/ a large flat blade screwdriver
t/ #2 Phillips screwdriver
t/ tape measure
t/ pliers
t/ sharp utility knife
t/ pencil
Hardware (in plastic bag)
Frame to Sash
3/4" Long Hex-
Head Screw
Safety Lock
Speed Nuts
Screws Top
Angle, Side
Retainer
Screw Front
Retaining
Qt¢
2
3
1
4
12
2
2
Loading ...
Loading ...
Loading ...