Loading ...
Loading ...
Loading ...
Installation instructions
I
[] REVERSING THE HARDWARE (CONT.)
4.2 Interchange hinge (and the shim glued to it) and
screws at top right with screws at top left of cabinet.
Do not tighten screws on hinge side at this time.
Installingthe hingeonthe left. Installingthe hingeon the right.
NOTES:
• Some hinges have fimr holes. Which holes wm
use fin" installing the hinge depends on which
side you install the hinge.
• The outer edge of the hinge should be parallel
to the edge of the case for correct installation.
[] REVERSING THE DOOR HANDLES
5.1 Transfer fresh food door handle
5.1.1 Remove the handle i_lug using a tai)e-tii)ped
putty knife under the edge, and remove the
screw underneath. Remove the two screws
holding the handle to the top of the door.
Plug,_
5.1.2 Remoxe the handle.
5.1.3 Remo_e the screws from the rioht_ edge, of the
door top and insert them into the handle screw
holes on the opposite side.
[] REVERSING THE DOOR
HANDLES ICONT.I
5.1 Transfer fresh food door handle (cont.)
5.1.4 _]th tai_e-tii_ped putty knife or thin-blade
screwdriver; pry out the i)lug button from the
hinge hole on the left side of the door and
insert it into the hole on the opposite side that
was w_cated bv remowfl of the top hinge.
PlugBu_
5.1.5 Pull the plug button fl'om the front of the door
and transfer it to the opposite side.
PlugButton
Toreattachthe
handleonthe
oppositeside.
5.2 Transfer door stop
5.2.1 Move the metal
door stop lI'OIll
the right end to
the left end.
DoorStop
LeftSide_°___
5.2.2 Moxe any
scFews fI'OIIl
the left end to
the right end.
RightS__
5.3 Reinstalling the Fresh Food Door
Handle
5.3.1 Attach the handle to _.._
the right side of the I - -=_
door with screws at
the top and trader
the handle _lu, _"'
5.3.2 Reinstall the
handle i)lug.
15
Loading ...
Loading ...
Loading ...