Loading ...
Loading ...
Loading ...
Installation Instructions
B REVERSING THE DOOR SWING (CONT.)
[] REMOVE THE FRESH FOOD DOOR
3.1 Tape the door shut with masking tape.
[] REMOVE THE FRESH FOOD DOOR (CONT.)
3.5 Transfer the two screws ti'om the opposite side of the
cabinet to the screw holes \_cated by the center
hinge remowd.
3.6 Transfer the washer (if your model has one) to the
opposite side.
3.2 Using a 5/16" hex-head socket screwdriver and
a 5/16" open-end wrench, remove the two
screws holding the center hinge (and the shim
glued to it) to the cabinet. I,ifl the center hinge
to fl'ee its pin from the socket in the top of the
door, and set hinge and screws aside. Be cm'eful
not to lose the center hinge spacer mad washer.
3.3 Remove the tape and tilt the door away from the
cabinet. I,ifl the door fl'om the pin in the bottom
hinge bracket. (If the plastic washer sticks to the
door bottom, put it back on the hinge.)
3.4 Set the door outside-up on a non-scratching suHi_ce.
3.7 %_ke one of the scre_vs removed in step 2 and start
it in the outeHnost screw hole on the opposite side.
Do not drive it all the way down--leave enough space
under the screw head fin" thickness of shim and
bracket.
[] REVERSING THE HARDWARE
4.1 Moxe die t)ottom hinge bracket (and shim glued to it)
and plasti( D(_tsh(!l_tt'()l// 111(!right side to the lefl side.
/I I Plastic
_'_[ I _*-. /Washer
Switchthe hingepinto the ¢1 ¢-._ I _'_
oppositesideof the bracket. [_. -_1_
Hinge_ -_
Bracket
14
Loading ...
Loading ...
Loading ...