Loading ...
Loading ...
Loading ...
22
© 2021 United States Stove Company
TROUBLE SHOOTING GUIDE
• GLASS “SOOT’S” UP AT A VERY FAST RATE
• FLAME IS LAZY, DARK, AND HAS BLACK TIPS
• AFTER STOVE HAS BEEN ON FOR A WHILE, THE BURNPOT OVERFILLS
Possible Causes Possible Remedies: (Unplug stove rst when possible)
Stove or vent pipe is dirty, which
restricts airow through the
burnpot.
Follow all cleaning procedure in the maintenance section of the
owner’s manual.
Vent pipe installed improperly.
Check to make sure the vent pipe has been installed according to
the criteria in the owner’s manual.
Air damper is set too far in (closed)
for a higher setting.
Pull the damper knob farther out away from the side of the stove
and try to burn the unit again.
Burnpot holes are blocked. Remove the burnpot and thoroughly clean it.
Air damper is broken.
Visually inspect the damper assembly. Make sure the damper plate
is attached to the damper rod. When the damper rod is moved the
plate should move with it.
Blockage in air intake pipe.
Visually inspect the air intake pipe that leads into the burnpot for
foreign material.
Combustion blower is not spinning
fast enough.
Test the RPM on the blower after the blades have been cleaned.
The RPM should be approximately 3000 RPM.
Bad Pellets. (Applies to GLASS
“SOOT’S” UP AT A VERY FAST RATE
Only)
The brand of pellets or the batch of pellets that are being used may
be of poor quality. If possible, try a different brand of pellets. You
might also want to try a brand that is made from a different type
of wood (softwood vs. hardwood). Different woods have different
characteristics when being burned.
Loading ...
Loading ...
Loading ...