Loading ...
Loading ...
Loading ...
Question:CanIconvertmyKenmoregasgrillfrom
onefueltypetoanother?
Answer:YourKenmoregasgrillismanufacturedto
exactspecificationsandisapprovedbytheCanadian
StandardsAssociation(CSA)forLPgasuseonly.For
yourownsafety,conversionkitsarenotavailableand
anyattempttoconvertyourgrillfromLPgastoNatural
Gaswillvoidyourproductwarranty.
Question:Aretheserialandmodelnumbersofmy
grilllistedsomewhereforfuturereference?
Answer:Yes,thisvaluableinformationislistedona
silverlabelfoundontherightsideofyourGrillHead
undertheSideShelf.
Question:Whydoesn'tthehoseandregulatorassem-
blysuppliedwithmynewKenmoregrillfittheolderLP
gastankI'veusedforyears?
Answer:TheU.S.Governmentregulatesgasappliances
andLPgastanks.Whenevernewregulationsarepassed
theLPgastankfittingsarealtered.Ifyourcurrenttank
doesnotfitthehoseandregulatorsuppliedwithyour
newgrill,thetankisoutdatedandmustbereplaced.
Question: What can cause grill parts to rust and what
affect does it have on the grill materials.
Answer: Rusting is a natural oxidation process and may
appear on Cast-Iron Burners, Steel Cooking Grids, Steel
Flame Tamers and steel cart parts. Because your grill is
manufactured with heavy gauge steel, rust will not affect
the short term performance of your grill or affect the taste
of your foods.
To protect against the natural rusting process, your
Cooking Grids and Flame Tamers have a porcelain finish.
However, dropping, scraping or scratching these items
will damage the porcelain finish and allow rusting. To
minimize rusting we recommend you "season" the
Cooking Grids regularlyibefore andafter each use.
Consistent seasoning wilt help castqron resist rusting
and will create a non-stick cooking surface.
Question: How do I season my Cooking Grids?
Answer: Before and after each cookout, apply a thin
layer of cooking oil, spray or vegetable shortening to
each Cooking Grid. Be sure to coat the entire surface
including edges and any areas with chipped porcelain.
Insert the Cooking Grids into your warm grill for 2 to 3
minutes.
Question: Sometimes my grill does not light when I
push the Ignitor Button. Why?
Answer: Refer to the Lighting Instructions in this
Owner's Manual. Also check these common causes.
• IgnitorAA battery may need replacing.
• Ignitor wires may be loose. Remove theAA
battery, inspect the Ignitor Junction Box found
behind the Control Panel, and connect any loose
wires.
Question: What is the best way to protect my new
Kenmore gas grill from the weather?
Answer: A good quality grill cover should be used to
protect your grill when not in use. Kenmore Grill Cover
#15831 is made to fit this particular grill model. Also,
follow the cleaning and maintenance instructions in this
Owner's Manual on a timely basis, and your new grill wilt
give you years of enjoyment.
Question: Where can I buy replacement parts?
Answer: For the repair or replacement parts you need
call 6 am - 11 pm CST, 7 days a week 1-800-366-
PART (1-800-366-7278). Use only Sears authorized
parts. The use of any part that is not Sears authorized
can be dangerous and will also void your product
warranty.
Question: Sometimes I hear a humming sound
coming from my regulator. What causes this?
Answer: The humming noise is actually the gas
flowing through the regulator. A low volume of noise is
perfectly normal and will not interfere with the opera-
tions of the grill. If humming noise is loud and exces-
sive you may need to purge air from the gas line or
reset the regulator excess gas flow device. Note: This
purging procedure should be done every time a new LP
gas tank is connected to your grill. For help with this
procedure refer to page 15, step 4, or call the Cus-
tomer Service Helpline, 8am - 8pm CST, Monday
through Friday at
1-888-317-7642.
18
Loading ...
Loading ...
Loading ...