Loading ...
Loading ...
Loading ...
5.
Be sure all 4 Casters are locked, then with
the assistance of another person, turn the
assembled grill upright. See Fig 5. Install
Tank Holder to right side of Bottom Shelf. Align
the holes on Tank Holder with the threaded
holes on the side of Bottom Shelf. Tighten
securely using 2 of the 1/4"x1/2" Pattern Head
Screws provided.
.
Attach the Tank Hook to the right side of Grill
Head as shown in Fig. 5. Align holes of Tank
Hook with holes on the right side of Grill Head.
Secure firmly using 2 of the 1/4"x1/2" Special
Round Head Screws and 2 of the 1/4" Wing Nuts
provided. Insert screws from inside Grill Head and
attach Wing Nuts from outside of Tank Hook.
7. Position Heat Shield into slots in Grease
Draining Tray.
.
From the back side of Grill Head install the
Grease Draining Tray and Heat Shield. See
Fig. 5. The Heat Shield is reeuired to be
oresent and centered for vour safety.
9. Install the Grease Receptacle under Grease
Draining Tray. See Fig. 5.
Installing Manual Lighting Stick
1. Attach the Manual Lighting Stick to the Left
Bowl Support Bracket as shown in Fig. 5a.
Align the hole at the end of Manual Lighting
Stick Wire with the threaded hole on the Left
Bowl Support Bracket. Tighten securely using
the M4x8mm Pattern Head Screw packed with
the Manual Liqhtinq Stick.
Figure 5a
Figure 5
GRILL HEAD
Figure 6
BOWL SUPPORT
BRACKET-LEFT
HEAT SHIELD
TANK HOLDER
SIDE SHELF FRAME
GREASE
RECEPTACLE
GRILL HEAD
GREASE
DRAINING
TRAY
SIDE BURNER
FRAME
M4x8mm PATTERN
HEAD SCREW _/_"
MANUAL BOWL SUPPORT
LIGHTING BRACKET-LEFT
Installing Side Shelf and Side Burner
Remove Side Burner from Side Burner Kit before
installing.
Enlisting the aid of an assistant, attach Side Burner
Frame to right side of grill. Attach Side Shelf
Frame to left side of grill as shown in Fig. 6.
Be sure the holes for the Spice Baskets appear
on the front side of the grill. Align the 4 holes
on Side Shelf Frame and Side Burner Frame with
the threaded holes on left and right Bowl Support
Brackets. Tighten securely using 4 of the 1/4"x3/
4" Pattern Head Screws provided.
BOWL SUPPORT
BRACKET-RIGHT
Figure 6a
M4x8mm PATTERN
HEAD SCREW
AND WASHER
HOLES FOR SIDE
BURNER VALVE KIT
SIDE BURNER
FRAME
;EMBLED
VALVE KIT
IRNER
VALVE BRACKET2. Install the Pre-assembled Valve Kit to the Side
Burner Frame. See Fig. 6a.
10
Loading ...
Loading ...
Loading ...