Loading ...
Loading ...
Loading ...
Assembly & Set-Up
3
8
Section 3 — ASSembly & Set-Up
Assembly
NOTICE: This unit is shipped with oil in the engine.
This unit is shipped without gasoline in the engine.
Fill up with gasoline as instructed and check oil
level as instructed in the Engine Operator’s manual
BEFORE operating your pressure washer.
NOTICE: The high-pressure pump was filled with oil
at the factory. Always check oil level before using
(refer to Maintenance & Adjustments for more
information).
Nozzles
1. Remove the colored quick-connect nozzles
from the plastic bag and insert them into
correct grommet on the nozzle holder. Nozzles
are color coded to match colored nozzles on
label. See Figure 3-1.
Figure 3-1
Wand to Gun
1. Connect spray wand to spray gun. Tighten
securely. See Figure 3-2.
Figure 3-2
Hose to Gun
1. Pull quick-connect coupler back on the hose
and insert gun. Release quick-connect coupler
and twist gun to make sure it is secure in
coupler. See Figure 3-3.
Figure 3-3
Setup
Gas and Oil Fill-Up
1. Add oil as instructed in the Engine Operator’s
manual before starting unit for the first time.
2. Service the engine with gasoline as instructed
in the separate engine owner’s manual.
WARNING: Use extreme care when
handling gasoline. Gasoline is extremely
flammable and the vapors are explosive.
Never fuel the machine indoors or while
the engine is hot or running. Extinguish
cigarettes, cigars, pipes and other sources
of ignition.
Contents of Crate
• Pressure Washer (1) • Trailer (1) • Quick Connect Spray Gun (1)
• Operator’s Manual (1) • Pressure Washer Hose (1) • Quick-Connect Nozzles (5)
• Engine Operator’s Manual (1)
• Trailer Operation’s Manual (1)
• Quick-Connect Spray wand (1) • Trailer Tongue & Tongue Jack (1)
Loading ...
Loading ...
Loading ...