Loading ...
Loading ...
Loading ...
legally responsible for installing and tionof the law, Contact your Sears
maintaining the operating condition of Service Center for the correct parts.
these parts. Failure to doso is a viola-
CARTON CONTENTS
Check carton contents against the fol-
lowinglist.
Model 358,795320
• Trimmer
• Shield with wing nut
• Assist Handle with'bolt and wing nut
• Container of Oil
• Spool with 20 ft. ofline
Examine partsfor damage, Do not use
damaged parts.
NOTE: it you need assistance or find
pads missing or damaged, call
1-800-235-5878.
It is normal forthe fuel filter to rattle in
the empty fuel tank,
Findingfuel or oilresidue on muffler is
normaldue tocarburetor adjustments
and testing done by the manufacturer.
ASSEMBLY
WARNING: Ifreceivedassembled,
repeatallstepstoensureyourunitis
pmpedyassembledand allfasteners
aresecure.
Besuretoassemblethehandletothe
unitbeforeyouassembletheshield.
ATTACHING THE HANDLE
(some unitsare already assembled)
WARNING: Make sure unitis propedy
assembled and allfasteners are secure.
• Assembiehandletotheunitasshown;
make sure bottom of handle isseated
inthe groove in the trigger housing.
NOTE: Wing nut must be assembled
on the right hand side of the unitas
shown in the above illustration.
• Make sure the bolt is seated into the
hex shapped hole in the handle.
• Pivothandle toacomfortable position.
• Tighten handle securely.
ATTACHING SHIELD
WARNING: The shield must be prop-
erly installed.The shield providespartial
protectionfromthe risk of thrown objects
to the operatorand othersand is
equippedwitha linellm_terwhichcuts
excess lineto the properlength. The line
limtter(on undersideofshield) is sharp
and can cutyou. For properorientation,
see illustrationin Operationsection.
• Remove wing nut from shield.
- Insert bracket into slot as shown.
• Pivot shield untilbolt passes through
hole in bracket.
• Securely tighten wing nut onto bolt.
_-_ Slot
"_,__ Bracket
Wing
nut
Loading ...
Loading ...
Loading ...