Loading ...
Loading ...
Loading ...
Problem Cause/solution
I fully charged the batteries, but
– still flashes,
– is displayed, or
–
the operating time seems to be
shorter.
R C
lean the battery ends ( , ) and the charge contacts with a
dry cloth and charge again.
R It is time to replace the batteries (page 10).
Making/answering calls, intercom
Problem Cause/solution
is displayed.
R T
he handset is too far from the base unit. Move closer.
R The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit. Register it
(page 48).
Noise is heard, sound cuts in and
o
ut.
R You are using the handset or base unit in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
The handset or base unit does
n
ot ring.
R The ringer volume is turned off. Adjust the ringer volume
(page 21, 41).
R Silent mode is turned on. Turn it off (page 46).
R The ringer volume is turned off by pressing and holding 0 (
)
o
n the handset. Press and hold 0 (
) again to turn it on
(
page 21).
I cannot make a call. R T
he dialing mode may be set incorrectly. Change the setting
(page 16).
I cannot answer an incoming call
u
sing voice commands.
R The answer by voice command feature is turned off. To turn it
on, see page 25.
R Baby monitor is set to “On”. Turn off the baby monitor feature
(page 47).
The unit answers an incoming
c
all on its own.
R This situation might happen due to a false detection of ambient
noise (dog barking, TV sound, etc.). Move the unit further away
from the noise sources.
R If you are using other telephone that has Talking Caller ID
feature turned on, it may also trigger false detection. Turn the
Talking Caller ID feature off on the other telephone.
R To minimize false detection, decrease the sensitivity level of the
answer by voice command (page 25, 43).
I cannot make long distance calls. R M
ake sure that you have long distance service.
I cannot use voice paging. R Y
ou cannot use voice paging if other units are in use.
For assistance, please visit http://shop.panasonic.com/support
63
Useful Information
KX-TGF892_(en-us)_0426_ver201.pdf 63 4/26/2022 3:14:19 PM
Loading ...
Loading ...
Loading ...